- Description
- Inquiry
Cure oven
The Cure oven is used to keep PCB dry after conformal coating process.
Technical specification:
Model | JW-IR300C | |||||||
Dimension | 3000*950*1300mm | |||||||
PCB transmit height | 920+/-20mm | |||||||
Direction | L to R; R to L | |||||||
Motor | AC220 120W | |||||||
Transmit method | By chain | |||||||
PCB width | Max.450mm | |||||||
Heater | 6 pcs/ 3 heating zones | |||||||
Warm up time | <10 minutes | |||||||
Max PCB components height | 100mm | |||||||
Control method | PLC+Touch screen | |||||||
Power supply | AC380V, 12KW |
Product Features:
2.Specially made aluminum guide rail,anti-high temperature,together with supporting system to decrease PCB deformed rate,no shake on guide rail to avoid PCB falling off.
3.Heated by heater,improve heating efficiency by average heating.
4.Oven chamber and inner chamber adopt T1.5 metel welding,durable and stable,to ensure heating not going out,saving electricity and avoid room temperature to raise.
5.Heating zone: all zones can be controlled independently, highest temperature:100℃.
6.PID temperature controller+touch screen to achieve high accuracy control for 3 heating zones.
Pictures:
Company introduction:
ShenZhen J-wide Electronics Equipment Co.,Ltd was founded in 2005,
mainly specialize in selling SMT peripheralequipment,like:Solder paste printer,Solder paste mixer,
PCB Conveyor,PCB Separator,PCB Loader,SMD Chip counter,Feeder trolley,Feeder calibrator etc.
We also sell used Sony and Mirae chip mounter,Feeders and spare parts;