- Cur síos
- Fiosrúchán
Cure oven
The Cure oven is used to keep PCB dry after conformal coating process.
Sonraíocht theicniúil:
Mionsamhail | JW-IR300C | |||||||
Gearrthóir cos PCB uathoibríoch JW-608A | 3000*950*1300mm | |||||||
PCB transmit height | 920+/-20mm | |||||||
Treo | Ó chlé go R.; R go L. | |||||||
Gearrthóir cos PCB uathoibríoch JW-608A | AC220 120W | |||||||
Transmit method | By chain | |||||||
Leithead PCB | Max.450mm | |||||||
Heater | 6 pcs/ 3 heating zones | |||||||
Warm up time | <10 minutes | |||||||
Max PCB components height | 100mm | |||||||
Modh rialaithe | PLC+Touch screen | |||||||
Soláthar leictreachas | AC380V, 12KW |
Gnéithe Táirge:
2.Specially made aluminum guide rail,anti-high temperature,together with supporting system to decrease PCB deformed rate,no shake on guide rail to avoid PCB falling off.
3.Heated by heater,improve heating efficiency by average heating.
4.Oven chamber and inner chamber adopt T1.5 metel welding,durable and stable,to ensure heating not going out,saving electricity and avoid room temperature to raise.
5.Heating zone: all zones can be controlled independently, highest temperature:100℃.
6.PID temperature controller+touch screen to achieve high accuracy control for 3 heating zones.
Pictiúirí:
Réamhrá na cuideachta:
Bunaíodh ShenZhen J-wide Electronics Equipment Co., Ltd i 2005,
speisialtóireacht den chuid is mó i ndíol peripheralequipment SMT,mhaith:Printéir greamaigh solder,Meascthóir greamaigh solder,
Iompróir PCB,Deighilteoir PCB,Luchtaitheoir PCB,Cuntar sliseanna SMD,Tralaí friothálacha,Calibrator friothálacha srl.
Díolfaimid freisin sliseanna sliseanna Sony agus Mirae a úsáidtear,Fothairí agus páirteanna breise;