- Opis
- Upit
Cure oven
The Cure oven is used to keep PCB dry after conformal coating process.
Tehničke karakteristike:
Model | JW-IR300C | |||||||
Dimenzija | 3000*950*1300mm | |||||||
PCB transmit height | 920+/-20mm | |||||||
Smjer | L do R; R do L | |||||||
Motor | AC220 120W | |||||||
Transmit method | By chain | |||||||
Širina PCB-a | Max.450mm | |||||||
Heater | 6 pcs/ 3 heating zones | |||||||
Warm up time | <10 minutes | |||||||
Max PCB components height | 100mm | |||||||
Control method | PLC+Touch screen | |||||||
Napajanje | AC380V, 12KW |
Značajke proizvoda:
2.Specially made aluminum guide rail,anti-high temperature,together with supporting system to decrease PCB deformed rate,no shake on guide rail to avoid PCB falling off.
3.Heated by heater,improve heating efficiency by average heating.
4.Oven chamber and inner chamber adopt T1.5 metel welding,durable and stable,to ensure heating not going out,saving electricity and avoid room temperature to raise.
5.Heating zone: all zones can be controlled independently, highest temperature:100℃.
6.PID temperature controller+touch screen to achieve high accuracy control for 3 heating zones.
Slike:
Company introduction:
ShenZhen J-wide Electronics Equipment Co., Ltd osnovana je godine 2005,
uglavnom specijalizirani za prodaju SMT periferne opreme,Kao:Printer paste za lemljenje,Mješalica za lemljenje paste,
PCB transporter,PCB separator,PCB učitavač,SMD Brojač čipova,Kolica za hranilicu,Kalibrator hranilice itd.
We also sell used Sony and Mirae chip mounter,Feeders and spare parts;