- Beskrivning
- Förfrågan
Cure oven
The Cure oven is used to keep PCB dry after conformal coating process.
Teknisk specifikation:
Modell | JW-IR300C | |||||||
Dimensionera | 3000*950*1300mm | |||||||
PCB transmit height | 920+/-20mm | |||||||
banner hem | L till R; R till L. | |||||||
Motor | AC220 120W | |||||||
Transmit method | By chain | |||||||
PCB-bredd | Max.450mm | |||||||
Heater | 6 pcs/ 3 heating zones | |||||||
Warm up time | <10 minutes | |||||||
Max PCB components height | 100mm | |||||||
Kontroll metod | PLC+Touch screen | |||||||
Strömförsörjning | AC380V, 12KW |
Produktfunktioner:
2.Specially made aluminum guide rail,anti-high temperature,together with supporting system to decrease PCB deformed rate,no shake on guide rail to avoid PCB falling off.
3.Heated by heater,improve heating efficiency by average heating.
4.Oven chamber and inner chamber adopt T1.5 metel welding,durable and stable,to ensure heating not going out,saving electricity and avoid room temperature to raise.
5.Heating zone: all zones can be controlled independently, highest temperature:100℃.
6.PID temperature controller+touch screen to achieve high accuracy control for 3 heating zones.
Bilder:
Företagsintroduktion:
ShenZhen J-wide Electronics Equipment Co., Ltd grundades i 2005,
är främst specialiserade på att sälja periferiutrustning för små och medelstora företag,tycka om:Lödpasta skrivare,Lödpasta mixer,
PCB-transportör,PCB-separator,PCB-laddare,SMD Chip counter,Matarvagn,Matarkalibrator etc..
Vi säljer även begagnade Sony och Mirae chipmounter,Matare och reservdelar;