- Paglalarawan
- Pagtatanong
Cure oven
The Cure oven is used to keep PCB dry after conformal coating process.
Teknikal na pagtutukoy:
Modelo | JW-IR300C | |||||||
Dimensyon | 3000*950*1300mm | |||||||
PCB transmit height | 920+/-20mm | |||||||
Direksyon | L hanggang R; R hanggang L | |||||||
Motor | AC220 120W | |||||||
Transmit method | By chain | |||||||
lapad ng PCB | Max.450mm | |||||||
pampainit | 6 pcs/ 3 heating zones | |||||||
Warm up time | <10 minutes | |||||||
Max PCB components height | 100mm | |||||||
Control method | PLC+Touch screen | |||||||
Supply ng kuryente | AC380V, 12KW |
Mga Tampok ng Produkto:
2.Specially made aluminum guide rail,anti-high temperature,together with supporting system to decrease PCB deformed rate,no shake on guide rail to avoid PCB falling off.
3.Heated by heater,improve heating efficiency by average heating.
4.Oven chamber and inner chamber adopt T1.5 metel welding,durable and stable,to ensure heating not going out,saving electricity and avoid room temperature to raise.
5.Heating zone: all zones can be controlled independently, highest temperature:100℃.
6.PID temperature controller+touch screen to achieve high accuracy control for 3 heating zones.
Mga larawan:
Pagpapakilala ng kumpanya:
Ang ShenZhen J-wide Electronics Equipment Co.,Ltd ay itinatag sa 2005,
pangunahing dalubhasa sa pagbebenta ng SMT peripheralequipment,gaya ng:Solder paste printer,Panghalo ng panghalo ng solder,
PCB Conveyor,PCB Separator,PCB Loader,Counter ng SMD Chip,Troli ng tagapagpakain,Feeder calibrator atbp.
Nagbebenta din kami ng ginamit na Sony at Mirae chip monter,Mga feeder at ekstrang bahagi;