Trasportatore di uscita dell'onda JW-808B

Wave outfeed conveyor function:

The wave outfeed conveyor is used after wave solder when PCB is out,which is transported to the next step by the wave outfeed conveyor..It also can help to cool down the PCB better by installing cooling fans.

 

Specifica tecnica:

Marca	Jwide
Modello	JW-808B wave outfeed conveyor
Dimensione esterna	1200*490*1200mm
Larghezza del trasportatore	400mm(opzionale)
Direzione PCB	L a R;or R to L
Velocità	0~4000mm/min
Il motore	1P AC220V 50 / 60Hz 15W
Alimentazione elettrica	1P AC220V 50 / 60Hz
Altezza del trasportatore	750~1200mm
Materiale cintura	static-free or steel mesh belt
Transmission length	400+800mm
Peso	Pezzi di ricambio

caratteristiche del prodotto:

1.Apply to connect the wave soldering and plug-in lines,unload PCB assembly after soldering.

2.Install heat radiation devise to cool PCB and elements to the full extent.

3.Belt materials selectable,hole green belt and anti-skidding belt.

4.The speed of the belt can be adjusted,as well as the angle and height of the railway.

Più foto:

Vantaggi:

1.Produttore professionista da anni.

2.Struttura del telaio in alluminio

3.Anti static and high temperature belt

4.Cooling fans can be installed

5.Width can be made to order