JW-RS350 Meánmhéid solder dé-tonn
1.Oiriúnach do tháirgeadh méid mheánmhéide
2.Max. leithead pcb:280mm
3.Córas rialaithe:brúigh an cnaipe / ríomhaire / I-dteagmháil roghnach
4.Cumas:250~350kg
- Cur síos
- Fiosrúchán
Dual wave solder:
Dual wave solder is used to weld PCB after insertion machine.
Gearrthóir cos PCB uathoibríoch JW-608A:
Machine features |
model | JWRS-350 |
Gearrthóir cos PCB uathoibríoch JW-608A | 4200*1200*1650MM | |
Soláthar leictreachas | 3P5W,380V/220V 50/60HZ 63A | |
Start power | 22.5KW | |
working power | 8KW | |
control system | PC + PLC | |
Spray Córas |
transmission method | air cylinder |
spray pressure | 0.25MPa-0.4MPa | |
flux flow control | 10-100 ml/min | |
Auto fill flux | uathoibríoch | |
exhaust method | up&down exhaust | |
exhaust tube diameter | 200 | |
exhaust capacity | 25M3/Min | |
Preheat system |
Preheating mode | IR tube |
temp.control mode | PID+SSR | |
preheat zone qty | 3 | |
preheat zone length | 1600mm | |
heating temperature | room temp.~250°C | |
warm up time | Approx. 15min | |
conveyor system |
Méid PCB | Max.400*350mm |
conveyor direction | L__R;R__L | |
conveyor speed | 0Gearrthóir cos PCB uathoibríoch JW-608A | |
conveyor height | 750± 20mm | |
component height | top:120mm/bottom:15mm | |
speed control mode | closed loop | |
finger | Titanium | |
rail width adjust | Manual | |
rail angle | 4~7° | |
Soldering system |
solder pot working method | Inverter |
solder pot material | Full titanium | |
wave height adjust | Digital control by PC | |
solder pot heater power | 6KW | |
solder pot mx.temp | 300°C | |
solder pot capacity | 250~350kg | |
solder pot warm up time | Approx.180min(setting:250°C) | |
temp.control mode | PID+SSR | |
others | cooling method | Enforced air |
Finger cleaning | Brush |
Gnéithe Táirge:
1.Ultra-compact design; only 4.6′ long (1400 mm)
2.Variable-speed titanium finger conveyor for PCB s up to 6.5″ (200 mm)
3.Smooth, precise width adjustment via hand wheel
4.Automatic finger-cleaner with pump and recirculation system
compatible with cleaners for both rosin and aqueous fluxes
5.Conveyor angle adjustable from 3″-7″
6.Dual-wave system with twin variable frequency controlled motors
and independent adjustment of wave crest height
7.Corrosion resistant solder pot, capable of handling lead free
and conventional Sn-Pb solders
8.PID temperature control and built-in molten solder level sensor
Big size wave solder machine:
Medium Size wave solder machine:
Mini wave solder machine:
Wave solder detailed parts:
Réamhrá na cuideachta:
ShenZhen J-wide Electronics Equipment Co., Ltd. Bunaíodh i 2005,
speisialtóireacht den chuid is mó i ndíol meaisíní SMT agus AI,Clúdaíonn ár gcuid táirgí:Printéir stionsail SMT,Lódóir PCB,Díluchtaitheoir PCB,Lódóir bord lom PCB,Iompróir cas PCB,Smeach PCB,Iompróir nasc PCB,oigheann reflow,sádróir tonnta,Meascthóir greamaigh solder,Cuntar sliseanna SMD,Deighilteoir gearrtha PCB V.,Gearrthóir luaidhe PCB,Meaisín téipeála SMD,Meaisín sciath neamhfhoirmiúil,srl,agus díolaimid gléasta sliseanna branda Sony agus Mirae freisin,agus páirteanna breise.
Táirgí Gaolmhara
-
Sádróir tonn mion JW-220
1.Oiriúnach do tháirgeadh cainníocht bheag
2.Max. leithead pcb:220mm
3.Córas rialaithe:brúigh an cnaipe / ríomhaire / I-dteagmháil roghnach
4.Cumas:180~220kg
-
JW-450 Meaisín sádrála tonn mór
1.Méara móra roghnach
2.Táirgeadh cainníocht mhór
3.Fad réamhthéamh:1.8M.
4.Cumas pota solder: 400KG