JW-RS350 Medium size dual wave solder

Dual wave solder:

Dual wave solder is used to weld PCB after insertion machine.

 

Produkto detalye:

Machine features	model	JWRS-350
	Dimensyon	4200*1200*1650MM
	Supply ng kuryente	3P5W,380V/220V 50/60HZ 63A
	Start power	22.5KW
	working power	8KW
	control system	PC+PLC
Spray System	transmission method	air cylinder
	spray pressure	0.25MPa-0.4MPa
	flux flow control	10-100 ml/min
	Auto fill flux	automatic
	exhaust method	up&down exhaust
	exhaust tube diameter	200
	exhaust capacity	25M3/Min
Preheat system	Preheating mode	IR tube
	temp.control mode	PID+SSR
	preheat zone qty	3
	preheat zone length	1600mm
	heating temperature	room temp.~250°C
	warm up time	Approx. 15min
conveyor system	Laki ng PCB	Max.400*350mm
	conveyor direction	L__R;R__L
	conveyor speed	0~2000mm/min
	conveyor height	750±20mm
	component height	top:120mm/bottom:15mm
	speed control mode	closed loop
	finger	Titanium
	rail width adjust	Manual
	rail angle	4~7°
Soldering system	solder pot working method	Inverter
	solder pot material	Full titanium
	wave height adjust	Digital control by PC
	solder pot heater power	6KW
	solder pot mx.temp	300°C
	solder pot capacity	250~350kg
	solder pot warm up time	Approx.180min(setting:250°C)
	temp.control mode	PID+SSR
others	cooling method	Enforced air
	Finger cleaning	Brush

 

Mga Tampok ng Produkto:

1.Ultra-compact design; only 4.6′ long (1400 mm)

2.Variable-speed titanium finger conveyor for PCB s up to 6.5″ (200 mm)

3.Smooth, precise width adjustment via hand wheel

4.Automatic finger-cleaner with pump and recirculation system

compatible with cleaners for both rosin and aqueous fluxes

5.Conveyor angle adjustable from 3″-7″

6.Dual-wave system with twin variable frequency controlled motors

and independent adjustment of wave crest height

7.Corrosion resistant solder pot, capable of handling lead free

and conventional Sn-Pb solders

8.PID temperature control and built-in molten solder level sensor

 

Big size wave solder machine:

Medium Size wave solder machine:

Mini wave solder machine:

Wave solder detailed parts:

 

Pagpapakilala ng kumpanya:

Ang ShenZhen J-wide Electronics Equipment Co., Ltd. ay itinatag sa 2005,
pangunahing dalubhasa sa pagbebenta ng mga makinang SMT at AI,Saklaw ng aming mga produkto:SMT stencil printer,Loader ng PCB,Unloader ng PCB,Walang load board board PCB,PCB turn conveyor,PCB flipper,PCB link conveyor,reflow oven,wave solder,Panghalo ng panghalo ng solder,SMD chip counter,PCB V cut separator,PCB lead cutter,SMD taping machine,Conformal coating machine,atbp,at nagbebenta din kami ng mga ginamit na Sony at Mirae brand chip mounters,at mga ekstrang bahagi.