JW-808B Wave outfeed conveyor

Wave outfeed conveyor function:

The wave outfeed conveyor is used after wave solder when PCB is out,which is transported to the next step by the wave outfeed conveyor..It also can help to cool down the PCB better by installing cooling fans.

 

Technyske spesifikaasje:

Merk	Jwide
Model	JW-808B wave outfeed conveyor
Outer diminsje	1200*490*1200JW-608A automatyske PCB skonk cutter
Conveyor width	400JW-608A automatyske PCB skonk cutter(fakultatyf)
JW-608A automatyske PCB skonk cutter	L oan R;or R to L
JW-608A automatyske PCB skonk cutter	0~4000mm/min
JW-608A automatyske PCB skonk cutter	1P AC220V 50/60Hz 15W
Streamtafier	1P AC220V 50/60Hz
Conveyor height	750~1200mm
JW-608A automatyske PCB skonk cutter	static-free or steel mesh belt
Transmission length	400+800JW-608A automatyske PCB skonk cutter
JW-608A automatyske PCB skonk cutter	Approx.48Kg

JW-608A automatyske PCB skonk cutter:

1.Apply to connect the wave soldering and plug-in lines,unload PCB assembly after soldering.

2.Install heat radiation devise to cool PCB and elements to the full extent.

3.Belt materials selectable,hole green belt and anti-skidding belt.

4.The speed of the belt can be adjusted,as well as the angle and height of the railway.

en blêd syn lifespan is:

Foardielen:

1.Profesjonele fabrikant foar jierren.

2.Aluminum frame structure

3.Anti static and high temperature belt

4.Cooling fans can be installed

5.Width can be made to order