- Description
- Inquiry
Dual wave solder:
Dual wave solder is used to weld PCB after insertion machine.
Product Specification:
Machine features |
model | JWRS-350 |
Dimension | 4200*1200*1650MM | |
Power supply | 3P5W,380V/220V 50/60HZ 63A | |
Start power | 22.5KW | |
working power | 8KW | |
control system | PC+PLC | |
Spray System |
transmission method | air cylinder |
spray pressure | 0.25MPa-0.4MPa | |
flux flow control | 10-100 ml/min | |
Auto fill flux | automatic | |
exhaust method | up&down exhaust | |
exhaust tube diameter | 200 | |
exhaust capacity | 25M3/Min | |
Preheat system |
Preheating mode | IR tube |
temp.control mode | PID+SSR | |
preheat zone qty | 3 | |
preheat zone length | 1600mm | |
heating temperature | room temp.~250°C | |
warm up time | Approx. 15min | |
conveyor system |
PCB size | Max.400*350mm |
conveyor direction | L__R;R__L | |
conveyor speed | 0~2000mm/min | |
conveyor height | 750±20mm | |
component height | top:120mm/bottom:15mm | |
speed control mode | closed loop | |
finger | Titanium | |
rail width adjust | Manual | |
rail angle | 4~7° | |
Soldering system |
solder pot working method | Inverter |
solder pot material | Full titanium | |
wave height adjust | Digital control by PC | |
solder pot heater power | 6KW | |
solder pot mx.temp | 300°C | |
solder pot capacity | 250~350kg | |
solder pot warm up time | Approx.180min(setting:250°C) | |
temp.control mode | PID+SSR | |
others | cooling method | Enforced air |
Finger cleaning | Brush |
Product Features:
1.Ultra-compact design; only 4.6′ long (1400 mm)
2.Variable-speed titanium finger conveyor for PCB s up to 6.5″ (200 mm)
3.Smooth, precise width adjustment via hand wheel
4.Automatic finger-cleaner with pump and recirculation system
compatible with cleaners for both rosin and aqueous fluxes
5.Conveyor angle adjustable from 3″-7″
6.Dual-wave system with twin variable frequency controlled motors
and independent adjustment of wave crest height
7.Corrosion resistant solder pot, capable of handling lead free
and conventional Sn-Pb solders
8.PID temperature control and built-in molten solder level sensor
Big size wave solder machine:
Medium Size wave solder machine:
Mini wave solder machine:
Wave solder detailed parts:
Company introduction:
ShenZhen J-wide Electronics Equipment Co.,Ltd was founded in 2005,
mainly specialize in selling SMT and AI machines,Our products cover:SMT stencil printer,PCB loader,PCB unloader,PCB bare board loader,PCB turn conveyor,PCB flipper,PCB link conveyor,reflow oven,wave solder,Solder paste mixer,SMD chip counter,PCB V cut separator,PCB lead cutter,SMD taping machine,Conformal coating machine,etc,and we also sell used Sony and Mirae brand chip mounters,and spare parts.